Headlight rules for motor-driven cycles

(a) The headlamp or headlamps upon every motor-driven cycle may be of the single- beam or multiple-beam type but in either event shall comply with the requirements and limitations set forth in this section. (b) Every headlamp or headlamps on a motor-driven cycle shall be of sufficient intensity to reveal a person or a vehicle at a distance of not less than one hundred feet when the motor-driven cycle is operated at any speed less than twenty-five miles per hour and at a distance of not less than two hundred feet when the motor- driven cycle is operated at a speed of twenty-five or more miles per hour, and at a distance of not less than three hundred feet when the motor-driven cycle is operated at a speed of thirty-five or more miles per hour. (c) In the event the motor-driven cycle is equipped with a multiple-beam headlamp or headlamps, the upper beam shall meet the minimum requirements set forth in subsection (b) and shall not exceed the limitations set forth in section 24-77(a) and the lowermost beam shall meet the requirements applicable to a lowermost distribution of light as set forth in section 24-77(b). (d) In the event the motor-driven cycle is equipped with a single-beam lamp or lamps, the lamp or lamps shall be so aimed that when the vehicle is loaded, none of the high-intensity portion of light, at a distance of twenty-five feet ahead, shall project higher than the level of the center of the lamp from which it comes.